RECON FIBERLOCK SMOKE ODOR SEALER – CLEAR X 1GAL (4/CASE)

$227.96

15 in stock

SKU: FIB 3091-4X1CS CLEAR Categories: , , ,

Description

RECON Smoke Odor Sealer encapsulates malodors on structural surfaces and blocks the toughest stains, typically found on fire damage restoration projects. Unlike typical water based coatings that “wick” smoke odors and stains out of the substrate as they dry, RECON Smoke Odor Sealer with OdorLock technology prevents smoke odors and stains from migrating through the coating while maintaining its breathability. Get one-coat odor control and continue to block odors even with seasonal changes in temperature and humidity when you use RECON Smoke Odor Sealer as your final step to encapsulate residual odors.

  1. Permanently encapsulates smoke odors
  2. Highly permeable; doesn’t trap moisture
  3. Can be applied in ductwork
  4. Available in a tintable white or clear
  5. Excellent stain blocker
  6. Water based and non-flammable
  7. Bonds to nearly any substrate
  8. Ideal for use in wall cavities

How to Use

SURFACE PREPARATION

Prior to applying Fiberlock’s ULTRA RECON Smoke and Odor Sealer it is critical that the substrate be thoroughly cleaned. Smoke odor encapsulation is a final step that needs to be part of a comprehensive smoke/odor management protocol.  This protocol should include the following steps: odor cleaning, odor neutralization and odor encapsulation. Fiberlock recommends cleaning with RECON Heavy Duty Cleaner or Extreme Duty Cleaner, followed by the application of RECON Extreme Duty Odor Counteractant. After the substrate is clean, dry and sound, apply ULTRA RECON Smoke Odor Sealer to encapsulate any residual odors that remain.

APPLICATION TOOLS

Apply ULTRA RECON Smoke Odor Sealer with a brush, roller or airless spray equipment.

  • Brush: Synthetic, nylon or polyester bristle
  • Roller: 3/8” nap synthetic fiber
  • Spray Settings: Pressure: 2000-3000 P.S.I. Tips: .015 to .021 tips

PRODUCT APPLICATION

Apply ULTRA RECON Smoke Odor Sealer generously and uniformly by brush, airless spray or roller. Apply one coat of ULTRA RECON Smoke Odor Sealer and ensure that the finished surface is properly sealed. Two-coats may be required on some porous or heavily stained surfaces. Topcoat floor applications when foot traffic or heavy storage is expected. ULTRA RECON Smoke Odor Sealer is tintable up to 2 oz. of universal liquid colorant per gallon. Can be directly applied to wallboard, sheetrock, wood, masonry and concrete. Ferrous metals may require a DTM primer to prevent flash rusting.

COVERAGE

  • Smooth Surfaces: 200-400 ft2/gal.
  • Porous Surfaces: 100-200 ft2/gal.

DRYING TIME

  • @ 70°F 50% R.H.
  • To Touch: 30 Min.
  • Recoat: 2 Hours
  • Topcoat: 2 Hours

CLEANUP

Clean tools and drippings with warm soapy water before ULTRA RECON Smoke Odor Sealer dries.  Dispose of waste according to all existing local, state and federal regulations. PRECAUTIONS Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Stir thoroughly. Do not mix with any other coatings, additives, solvents or colors in oil. Do not apply when air or surface temperature is below 45°F, or when drying conditions are poor or when surfaces are above a 15% moisture level content. In areas with high humidity, apply when surface temperature is 45°F or higher. Use adequate ventilation during application. When applying with a sprayer, wear a NIOSH approved respirator with any R, P, N or HE filter.

Additional information

Weight 38 lbs
Dimensions 15 × 20 × 15 in

Reviews

There are no reviews yet.

Be the first to review “RECON FIBERLOCK SMOKE ODOR SEALER – CLEAR X 1GAL (4/CASE)”

Your email address will not be published. Required fields are marked *